[yogi]

misii,, saya dah puyeng ni ga bisa" konek modem nya.. udah ngikutin semua tutorial di thread ini: http://forum.indonesianbacktrack.or.id/s...hp?tid=341
tapi pas mao konek ga bisa",, muncul pesan "NO CARRIER" kek gini lengkapnya:

Spoiler! :

root@bt:~# lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0930:0215 Toshiba Corp.
Bus 001 Device 004: ID 04f2:b289 Chicony Electronics Co., Ltd
Bus 001 Device 003: ID 12d1:14ac Huawei Technologies Co., Ltd.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@bt:~# wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyUSB3<*1>: ATQ0 V1 E1 -- OK
ttyUSB3<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB3<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB3<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB3<*1>: Speed 9600: AT -- OK
ttyUSB3<*1>: Max speed is 9600; that should be safe.
ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB3<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
root@bt:~# wvdial
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
NO CARRIER
--> No Carrier! Trying again.
^CCaught signal 2: Attempting to exit gracefully...
--> Disconnecting at Wed Feb 22 23:43:47 2012

kek gitu terus dia.. kira" knapa lg yah itu? apa lagi yg salah coba??
setting wvdial.conf nya udah gini:

Spoiler! :

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Phone = *99#
Modem = /dev/ttyUSB0
Username = PPP
Password = PPP
Baud = 9600

pakek telkomsel flash,, mohon petunjuknya kk :badpc: