|
08-28-2011, 02:47 PM
(08-10-2011, 12:42 AM)hadist Wrote: Thank broezzaez berkat bantuan broBack tarck ane uda gak sepi dari Internet.. wah sama sama mas bro...senang bisa bermanfaat nih thread :pc:
let's visit Technomorphosa
01-10-2012, 11:43 AM
(01-10-2012, 11:20 AM)radityanoor Wrote: om, cara ini bisa dipake buat modem cdma kan? bisa bro, sama aja
I'm @ikonspirasi - Facebook
Personal blog: http://ikonspirasi.net
01-12-2012, 06:54 PM
mohon bantuannya, saya menggunakan modem prolink phs 101 dan flash, tetapi ga bisa konek internet...
root@bt:~# wvdialconf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. Modem Port Scan<*1>: S0 S1 S2 S3 ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyUSB2<*1>: ATQ0 V1 E1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: PROLiNK CORPORATION ttyUSB2<*1>: Speed 9600: AT -- OK ttyUSB2<*1>: Max speed is 9600; that should be safe. ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB2. Modem configuration written to /etc/wvdial.conf. ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" root@bt:~# wvdial --> WvDial: Internet dialer version 1.60 --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT<*99#> --> Waiting for carrier. ATDT<*99#> CONNECT 3600000 --> Carrier detected. Waiting for prompt. --> Connected, but carrier signal lost! Retrying... --> Sending: ATDT<*99#> --> Waiting for carrier. --> Timed out while dialing. Trying again. --> Sending: ATDT<*99#> --> Waiting for carrier. --> Timed out while dialing. Trying again. --> Sending: ATDT<*99#> --> Waiting for carrier. --> Timed out while dialing. Trying again. --> Sending: ATDT<*99#> --> Waiting for carrier. --> Timed out while dialing. Trying again.
01-27-2012, 10:48 PM
(01-12-2012, 06:54 PM)conanti Wrote: mohon bantuannya, saya menggunakan modem prolink phs 101 dan flash, tetapi ga bisa konek internet... masih belum ada yang jawab nih, tolongin dong bro.... masih menunggu jawaban 
01-28-2012, 02:04 AM
dari errornya sih modem udah ga masalah, username n password termasuk APN gmn settingnya bro? tolong paste disini sekalian
I'm @ikonspirasi - Facebook
Personal blog: http://ikonspirasi.net
01-28-2012, 05:22 PM
(01-28-2012, 02:04 AM)konspirasi Wrote: dari errornya sih modem udah ga masalah, username n password termasuk APN gmn settingnya bro? tolong paste disini sekalian [Dialer Defaults] Init1 = ATI Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = AT+CGDCONT=1, "IP", "internet" Password = 'ppp' Phone = <*99#> New PPPD = yes Modem Type = Analog Modem Stupid Mode = yes Baud = 3600000 Auto DNS = 1 Modem = /dev/ttyUSB1 ISDN = 0 Username = 'ppp' Carrier Check = no errornya sekarang jadi gini : root@bt:~# wvdial --> WvDial: Internet dialer version 1.60 --> Initializing modem. --> Sending: ATI ATI Manufacturer: PROLiNK CORPORATION Model: PHS101 Revision: BD_P679M1V1.0.1B18 IMEI: 353907042193721 +GCAP: +CGSM,+FCLASS,+DS OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CGDCONT=1, "IP", "internet" AT+CGDCONT=1, "IP", "internet" OK --> Modem initialized. --> Sending: ATDT<*99#> --> Waiting for carrier. ATDT<*99#> CONNECT 3600000 --> Carrier detected. Starting PPP immediately. --> Starting pppd at Sat Jan 28 16:10:13 2012 --> Pid of pppd: 2470 --> pppd: 2[7f] --> Using interface ppp0 --> pppd: 2[7f] --> pppd: 2[7f] --> pppd: 2[7f] --> pppd: 2[7f] --> pppd: 2[7f] --> pppd: 2[7f] --> Disconnecting at Sat Jan 28 16:10:43 2012 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 5 seconds --> Initializing modem. --> Sending: ATI --> Sending: ATQ0 --> Re-Sending: ATI --> Modem not responding. --> Initializing modem. --> Sending: ATI --> Sending: ATQ0 --> Re-Sending: ATI --> Modem not responding. 
01-28-2012, 05:35 PM
(01-28-2012, 05:22 PM)conanti Wrote:(01-28-2012, 02:04 AM)konspirasi Wrote: dari errornya sih modem udah ga masalah, username n password termasuk APN gmn settingnya bro? tolong paste disini sekalian Coba pancing dulu pake sakis3g, kalo uda exit trus pake wvdial
01-28-2012, 06:28 PM
(01-28-2012, 05:22 PM)conanti Wrote:coba om ganti /dev/ttyUSB1 jadi /dev/ttyUSB2 karena kalo dilihat dari atas (Found a modem on /dev/ttyUSB2.) yang berati modem anda berada di ttyUSB2 bukan ttyUSB1(01-28-2012, 02:04 AM)konspirasi Wrote: dari errornya sih modem udah ga masalah, username n password termasuk APN gmn settingnya bro? tolong paste disini sekalian 
Every Second, Every Minutes, Every Hours, Every Days Its Never End
|
