Menggunakan modem Air Flash di backtrack

**jufianto** · 04-18-2012, 08:02 PM

(04-18-2012, 05:21 PM)ekawithoutyou Wrote: coba setingan di ttyUSB < diganti 0 ato 1
maksud ane di wvdialnye

udah saya ganti,malahan sampe ttyUSB5
hasilnya sama semua

**jufianto** · 04-19-2012, 10:12 AM

alhamdulillah
udah solve masalahnya Smile

**Junior Riau** · 04-19-2012, 10:19 AM

ajarin abang juff

**Al - Ayyubi** · 05-24-2012, 01:34 PM

(04-19-2012, 10:19 AM)junior.riau18 Wrote: ajarin abang juff

aku juga ajari bang Smile

**gilar_blintz** · 06-15-2012, 03:48 PM

(04-19-2012, 10:12 AM)jufianto Wrote: alhamdulillah
udah solve masalahnya

ajarin donk om.. punya ane kagak bisa terus... solusinya gmna om?? :badpc:

**Backtrack Dragon** · 06-15-2012, 09:41 PM

Masalahku belum solve sampai sekarang Big Grin

Masalahnya tetap seperti ini

root@biluping:~# wvdial flexi
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory

Sudah di ganti USB0 s/d USB kesekian tapi tetap tampilannya seperti itu Big Grin

**jufianto** · 06-15-2012, 11:00 PM

coba ketik di console wvdialconf
nantik muncul seperti ini

Code:
Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3   S4   S5   S6   S7   

Modem Port Scan<*1>: S8   S9   S10  S11  S12  S13  S14  S15  

Modem Port Scan<*1>: S16  S17  S18  S19  S20  S21  S22  S23  

Modem Port Scan<*1>: S24  S25  S26  S27  S28  S29  S30  S31  

ttyUSB0<Info>: Device or resource busy

Modem Port Scan<*1>: USB0 

WvModem<*1>: Cannot get information for serial port.

ttyUSB1<*1>: ATQ0 V1 E1 -- OK

ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK

ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK

ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK

ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK

ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: StongRising.CO

ttyUSB1<*1>: Speed 9600: AT -- OK

ttyUSB1<*1>: Max speed is 9600; that should be safe.

ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

WvModem<*1>: Cannot get information for serial port.

ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud

ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud

ttyUSB2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

WvModem<*1>: Cannot get information for serial port.

ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud

ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud

ttyUSB3<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB1.

Modem configuration written to /etc/wvdial.conf.

ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

itu punya ane terdeteksi di ttyUSB1
kalau not found bearti modemnya belum detek

**Backtrack Dragon** · 06-15-2012, 11:25 PM

(06-15-2012, 11:00 PM)jufianto Wrote: coba ketik di console wvdialconf
nantik muncul seperti ini

Code:
Scanning your serial ports for a modem. Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7 Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15 Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23 Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31 ttyUSB0<Info>: Device or resource busy Modem Port Scan<*1>: USB0 WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- OK ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: StongRising.CO ttyUSB1<*1>: Speed 9600: AT -- OK ttyUSB1<*1>: Max speed is 9600; that should be safe. ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK WvModem<*1>: Cannot get information for serial port. ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB3<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Found a modem on /dev/ttyUSB1. Modem configuration written to /etc/wvdial.conf. ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
itu punya ane terdeteksi di ttyUSB1
kalau not found bearti modemnya belum detek

Sudah di coba tapi hasilnya seperti ini...

root@biluping:~# wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7
Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15
Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23
Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31

Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <[email protected]>.

Kok modemnya belum terdetek juga yah? Big Grin

**Junior Riau** · 06-16-2012, 12:11 AM

belum detect itu om modemnya,, ada yang kurang gak langkahnya??

iKONspirasi · 06-16-2012, 01:10 AM

(06-15-2012, 11:25 PM)Backtrack Dragon Wrote:
(06-15-2012, 11:00 PM)jufianto Wrote: coba ketik di console wvdialconf
nantik muncul seperti ini

Code:
Scanning your serial ports for a modem. Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7 Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15 Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23 Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31 ttyUSB0<Info>: Device or resource busy Modem Port Scan<*1>: USB0 WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- OK ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: StongRising.CO ttyUSB1<*1>: Speed 9600: AT -- OK ttyUSB1<*1>: Max speed is 9600; that should be safe. ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK WvModem<*1>: Cannot get information for serial port. ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB3<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Found a modem on /dev/ttyUSB1. Modem configuration written to /etc/wvdial.conf. ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
itu punya ane terdeteksi di ttyUSB1
kalau not found bearti modemnya belum detek

Sudah di coba tapi hasilnya seperti ini...

root@biluping:~# wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7
Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15
Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23
Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31

Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <[email protected]>.

Kok modemnya belum terdetek juga yah?

kayaknya modem jadi flashdrive atau cdrom tuh, coba lihat ada ga? diunmount dulu aja