03-08-2012, 07:09 PM
Cuma mau share aja ini juga copy paste
dan alhamdulillah berjalan lancar dilaptop saya
laptop saya AC*r 4745G
Langsung aja ya
DOWNLOAD ATI DRIVERS FOR BACKTRACK:
1.Ati AMD Accelerated Parallel Processing (APP) SDK:,
http://developer.amd.com/sdks/AMDAPPSDK/...fault.aspx
2.ati driver installer for linux:
http://support.amd.com/us/gpudownload/li...linux.aspx
Install OpenCL on Backtrack
In this guide we will be installing and configuring OpenCL on Backtrack.
NOTE: You might need to make some minor tweaks depending on your system.
Let's begin:
First of all before we start we want to make sure that our system is up to date.
Before we go on with installing the ATI drivers we need to get our kernel source prepared.
Now that we are set up it's time to download the ATI drivers.
download both drivers and move to desktop.
in terminal write:
Before we are finished there is one more thing that we need to install, The AMD Accelerated Parallel Processing (APP) SDK, this one needs to be installed according to your CPU architecture.
For 32 bit architecture:
For 64 bit architecture:
We will also need cmake and cmake++ along with some other library files.
First we install the libraries and cmake:
Before we can install cmake++ we need to set the ATI Stream paths:
Now we can proceed with the installation:
In addition now we can install Pyrit with the OpenCL option.
Now we can test Pyrit.
SUMBER
added on homepage http://indonesianbacktrack.or.id/index.p...eon_HD6310 | edited by zee eichel
dan alhamdulillah berjalan lancar dilaptop saya
laptop saya AC*r 4745G
Langsung aja ya
DOWNLOAD ATI DRIVERS FOR BACKTRACK:
1.Ati AMD Accelerated Parallel Processing (APP) SDK:,
http://developer.amd.com/sdks/AMDAPPSDK/...fault.aspx
2.ati driver installer for linux:
http://support.amd.com/us/gpudownload/li...linux.aspx
Install OpenCL on Backtrack
In this guide we will be installing and configuring OpenCL on Backtrack.
NOTE: You might need to make some minor tweaks depending on your system.
Let's begin:
First of all before we start we want to make sure that our system is up to date.
Quote:root@bt:~# apt-get update && apt-get upgrade
Before we go on with installing the ATI drivers we need to get our kernel source prepared.
Quote:root@bt:~# prepare-kernel-sources
root@bt:~# cd /usr/src/linux
root@bt:~# cp -rf include/generated/* include/linux/
Now that we are set up it's time to download the ATI drivers.
download both drivers and move to desktop.
in terminal write:
Quote:cd /root/Desktop/
root@bt:~/Desktop# chmod +x amd-driver-installer-12-1-x86.x86_64.run
root@bt:~/Desktop# ./amd-driver-installer-12-1-x86.x86_64.run
root@bt:~/Desktop# reboot
Before we are finished there is one more thing that we need to install, The AMD Accelerated Parallel Processing (APP) SDK, this one needs to be installed according to your CPU architecture.
For 32 bit architecture:
Quote:cd /root/Desktop/
root@bt:~/Desktop# wget http://developer.amd.com/Downloads/AMD-A...-lnx32.tgz
root@bt:~/Desktop# tar -xvzf AMD-APP-SDK-v2.6-lnx32.tgz
root@bt:~/Desktop# ./Install-AMD-APP.sh
For 64 bit architecture:
Quote:cd /root/Desktop/
root@bt:~/Desktop# wget http://developer.amd.com/Downloads/AMD-A...-lnx64.tgz
root@bt:~/Desktop# tar -xvzf AMD-APP-SDK-v2.6-lnx64.tgz
root@bt:~/Desktop# ./Install-AMD-APP.sh
We will also need cmake and cmake++ along with some other library files.
First we install the libraries and cmake:
Quote:root@bt:~# apt-get install libroot-python-dev libboost-python-dev zlib1g-dev libssl-dev cmake libboost1.40-all-dev
Before we can install cmake++ we need to set the ATI Stream paths:
Quote:root@bt:~# echo "ATISTREAMSDKROOT=/opt/AMDAPP
root@bt:~# export ATISTREAMSDKROOT" >> ~/.bashrc
root@bt:~# source ~/.bashrc
Now we can proceed with the installation:
Quote:root@bt:~# svn co https://calpp.svn.sourceforge.net/svnroot/calpp calpp
root@bt:~# cd calpp/trunk
root@bt:~# cmake .
root@bt:~# make
root@bt:~# make install
In addition now we can install Pyrit with the OpenCL option.
Quote:root@bt:~# svn checkout http://pyrit.googlecode.com/svn/trunk/ /tmp/pyrit
root@bt:~# cd /tmp/pyrit/pyrit && python setup.py build && python setup.py install
root@bt:~# cd /tmp/pyrit/cpyrit_opencl && python setup.py build && python setup.py install
Now we can test Pyrit.
Quote:root@bt:~# pyrit list_cores
root@bt:~# pyrit benchmark
SUMBER
added on homepage http://indonesianbacktrack.or.id/index.p...eon_HD6310 | edited by zee eichel