Friday , March 29 2024

Smart ac692

Desc

Kali Version : Kali-Linux 1.05

Jenis Modem : USB
Versi : AC692

Fix Step:

[sociallocker]

Cek status

[text]root@bt:~# lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 004: ID 19d2:fff1 ZTE WCDMA Technologies MSM
Bus 003 Device 002: ID 09da:9090 A4 Tech Co., Ltd XL-750BK Laser Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 13d3:5165 IMC Networks[/text]

Tidak perlu di eject lagi, seperti modem smart yang lain

kalau di eject jadi nya seperti ini

[text]root@bt~# eject /dev/sr1
eject: unable to find or open device for: /dev/sr1'[/text]

Jalankan wvdialconf

[text]root@bt:~# wvdialconf
Editing
/etc/wvdial.conf’.[/text]

Scanning your serial ports for a modem

[text]Modem Port Scan<*1>: S0 S1 S2 S3
ttyUSB0<*1>: ATQ0 V1 E1 — OK
ttyUSB0<*1>: ATQ0 V1 E1 Z — OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 — OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB0<*1>: Modem Identifier: ATI — Manufacturer: ZTEMT INCORPORATED
ttyUSB0<*1>: Speed 9600: AT — OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB1<*1>: ATQ0 V1 E1 — OK
ttyUSB1<*1>: ATQ0 V1 E1 Z — OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 — OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB1<*1>: Modem Identifier: ATI — Manufacturer: ZTEMT INCORPORATED
ttyUSB1<*1>: Speed 9600: AT — OK
ttyUSB1<*1>: Max speed is 9600; that should be safe.
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB2<*1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
ttyUSB3<*1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB3<*1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
ttyUSB3<*1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
ttyUSB4<*1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB4<*1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
ttyUSB4<*1>: ATQ0 V1 E1 — and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"[/text]

Edit file konfigurasi wvidial pada /etc/wvdial.conf

[text]root@bt:~# nano /etc/wvdial.conf
[Dialer Defaults] Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Command Line = ATDT
ISDN = 0
New PPPD = yes
FlowControl = CRTSCTS
Phone = #777
Modem = /dev/ttyUSB0[/text]

Output

[text]root@m1+5c:~# wvdial
–> WvDial: Internet dialer version 1.61
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
–> Modem initialized.
–> Sending: ATDT#777
–> Waiting for carrier.
ATDT#777
CONNECT 3100000
–> Carrier detected. Waiting for prompt.
~[7f]}#@!}!}!} }/}"}&} } } } }#}%B#}%})h~
–> PPP negotiation detected.
–> Starting pppd at Tue Oct 8 04:36:59 2013
–> Pid of pppd: 3276
–> Using interface ppp0
–> pppd: %[7f] –> pppd: %[7f] –> pppd: %[7f] –> pppd: %[7f] –> local IP address 10.161.252.122
–> pppd: %[7f] –> remote IP address 10.17.95.9
–> pppd: %[7f] –> primary DNS address 10.17.3.246
–> pppd: %[7f] –> secondary DNS address 10.17.125.235
–> pppd: %[7f][/text]

check wirelles network

[text]root@bt:/usr/src#iwconfig[/text]

restart & done

[/sociallocker]

Refrence :

$forum/Thread-Huawei-Mobile-Partner-di-Kali-Linux